Horizon treadmill walk belt installation
22,651
Published 2022-01-07
For assistance or parts email- [email protected]
or visit WWW.FITNESSPARTSPRO.COM
horizonfitnesspartspro.com/
For more videos, see my DIY channel:
youtube.com/c/FitnessTechnologyServices/videos
All Comments (21)
-
Very timely video. Thank you for posting because this is exactly what I needed.
-
That’s great video.. I just ordered my replacement belt for my Horizon T102. 👍
-
Thank you—very detailed! I'm just about done with my belt replacement.
-
Yes a great and helpful video. Just note that if you have an horizon like mine you will have to take the board right off
-
Thanks for this! Very helpful.
-
Hi! I can’t see what the static guard strap looks like. I see you unscrew something and place it under the treadmill where I can’t see what it is shaped like. But, I got this far with the video really well!
-
Great video. I replaced the walking belt on my horizon t500 I’ve had since 2008. I’m not sure what I did wrong but if you are at the foot of the treadmill looking up at the control panel the belt immediately shifts to the left and runs into the drive belt after about a minute.
-
Great video, I got the belt on and running, have two left over parts though that I can’t remember where there go, any suggestions on where I can go to figure that out?
-
Great video, thank you, I replaced the belt perfectly here in the UK. I am having problem tho with the bet slowing down after approx 20 minutes at 6kph, it appears to slow to around 4kph, when I get off its back to its normal 6kph. The belt appears to be fine, what would you suggest I check first?
-
But why cut the old belt after seeing only having to lift deck to put on new belt also after removing the back roller completely I thought it would’ve been easier to just slacken the front .like u said when working on the road ,time is everything but still very informative thanks been a great help
-
You should have mentioned that the belt should be checked to see if it's directional. You likely know that and may have checked when you got the belt, but anyone doing it for the first time might miss that detail.
-
Would this treadmill be pretty similar to the Horizon CT5.0 layout? I need a new belt so i am hoping that I could follow this when I get my new one. I'm a first timer at changing a belt!
-
Where would you recommend getting a belt replacement belt for a T203? Thanks for the vid!
-
What tool do you use to thread the rear bolts? I removed mine in an attempt to loosen the belt and realign/re center my belt and now i cannot get either bolt to thread back in the hole with the allen wrench that came with the tread mill. Very frustrrating!
-
where could i get a belt like the one you use in the video for a t30 tm76d?
-
What is the name of the manufacturer of the belt you used or let me know how to order from your web sight
-
My girlfriend has this treadmill and the belt keeps slipping to the right. Do you know how i can fix this
-
Realistically, how long does it take for someone who has medium skill level
-
Sir how to install in treadmill speedometer
-
Is horizon t101?
