How to EASILY Adjust the Idle Screw on Your 1st Gen Cummins!
16,639
Publicado 2020-11-16
Check out my other videos: youtube.com/c/decent1stgen
Follow me on Instagram: decent_garage
Follow me on Facebook: www.facebook.com/timstevenson1
If you also need to know how to break the idle screw lock nut loose go watch this video: • Why Does WATER LEAK Into My Cab?? | A...
Contact Info
Email: [email protected]
Address: PO Box 154, Payson UT, 84651
Music from bensound.com
#1stgencummins #cummins #DecentGarage
Todos los comentarios (21)
-
I feel like I have found the fountain of youth! Well... Maybe not. But I did discover an easy way to adjust the idle screw on the VE injection pump. Comment below if you are as excited as I am!
-
Thanks bro I appreciate it
-
You're the man
-
Perfect video. Thank you
-
So if your truck has all the stock components there is a 10mm size jam nut in there to prevent the screw from in screwing . You can disconnect the two fuel lines and the top one with the fitting going into the motor you can angle the fuel line in the 5 o clock position towards the cab . You then get 10mm deep socked and a 3/8 ratchet in it to break it free then use your handy method to adjust then I just hand the nut in case I want to play w it later down the road
-
Tried to use my HF POS pic to set my spring on the throttle from your gov spring video. The pic started turning in the handle.
-
Can you do this without mods for winter to boost idle
-
Love the practical, "get to the point" content. Keep up the good work!
-
Great info. This is why I love this channel, to the point useful information.
-
Great shortcut and not a pain in ass. THANKS.
-
Good guy right here thanks for all you do for the first gen community.. give him a follow everyone
-
Thank you! I was just researching on how to adjust my idle last night. This is awesome!
-
What do you do if the screw wont turn ?
-
When I turned the fuel up one mine I just took my Reemer and grinded a little off work great an took know time
-
Had to leave a like after the “that’s what she said” joke 😂😂 great video!
-
Thank you, Thank you. Needing turn down my idle speed and after staring at the VE IP for a little bit and realizing the screw I needed to adjust was in a crazy place I came in and found your site. Guess what, I was right and I even have that tool. Now I'm going to go get it adjusted. Again, Thank you.
-
Awesome! Loving the tech tips!
-
this tip will come in handy as I just put a newly rebuilt pump on my old girl (Thanks Hungry Diesel) and I am sure there will be a need to adjust a few screws. (hahah you know what I mean). Thank you Tim!!! Another stellar vid.
-
Awesome!! Thanks man. Gonna get to that this this weekend. 👌
-
Awesome vid! Very informative!
