Anytone ATD878UVII Plus Analog and Digital APRS Setup and Demonstration
12,915
Publicado 2021-06-23
Please visit our amazon store simplyhamradi-20 to purchase this product:
Anytone ATD878UVII Plus
www.amazon.com/gp/product/B08ZYXHZWW/ref=as_li_tl?…
=1789&creative=9325&creativeASIN=B08ZYXHZWW&linkCode=as2&tag
=simplyhamradi-20&linkId=a7779184bee54e68649ed82b0ccc2ea2
Please use our Bridgecomm link as it helps our channel out dearly for purchases
www.bridgecomsystems.com/?ref=2mxwl_4hgol
Consider supporting my channels on Patreon.com/SimplyHamRadio
there are three sponsorship levels to choose from, Thank You
Todos los comentarios (9)
-
This was a really good video. I just got started with DMR with the same radio. Love it. But there is so much information there, it is insane. Thank you.
-
Danke für das Video 📡
-
A quick note for consideration for those of you looking to use AT options for tri band, especially if your dmr group requires expanded frequency range for the codeplug. The at options from my experience will flash an Anytone 878UVII image (not plus) and lose the ability to utilize APRS Analog Recieve. Just wanted to forewarn others this may be a possibility.
-
I don't think you need to set up a special analog channel for APRS. All you need to do is set-up the Analog Transmission Frequency on the APRS set-up in the CPS. Turn your APRS on in the radio by selecting the Upload Type. Then select the trigger, PTT either Tx start or Tx end. Then, no matter what digital or analog channel you are on the beacon will go out. The digital APRS works the same way, except you have to set-up the digital report channel in the APRS section of the CPS.
-
You didn't cover the 310999 channel
-
I cannot find TG 310999 or TG 99 on the BM TG list. Do you have a link to where I could find these. I don’t see them on DMR+(DMR-MARC).
-
I want your beeps....how do I set my radio like that?
-
Please remove the background and protected sticker. Other than that the info is excellent. Thanks.