OBDII readings Renault Scenic 2000
225
Published 2018-09-21
I am beginning the elimination process, but would appreciate understanding these values. I had just parked up when I decided to capture these, so you will see I hold a fairly steady 2000 RPM for about 30 seconds, then let it drop to idle for about 30 seconds, then turn off the engine, then restart it (takes a bit of time to reestablish connection), I let it idle then 'blip' the throttle, then let it idle before ending the capture.
I can't obtain MAF sensor settings, nor am I convinced I have a second Lambda sensor, nor do I seem to be able to obtain a second fuel trim reading, but am trying to get my head around the software. My car seems to be a bit of a mix between the outgoing Scenic Mk1 phase 1 and Scenic Mk1 phase 2 in bodywork, the engine seems the same, but the software seems weird as even on the SnapOn system at the garage those same readings don't exist.
They have been recorded using a Bluetooth ELM327 device connected to the OBDII port, using screen capture software on the Xperia Z3. It really is the best capture I can get, if I try to capture them individually they make even less sense!
I feel (from what I can gather watching other videos) that the Lambda sensor is a little over the place, and when I read the engine load it says 100% all the time!. The O2 bank 1 sensor voltage varies, but the O2 bank 2 sensor stays at 0.4v all the time, those are the only O2 sensors I can obtain readings for.
I do intend to get some more readings over the next few days, hopefully in a landscape view...