2015 Hyundai Sonata P0017

Thanks! Great video!

Great video alldata and identafix didn't show me where to set my cam after I removed the intake phaser but I was able to use your video as a reference to set my intake camshaft

How do you know where to set the intake camshaft when it moved from taking the phaser sprocket bolt out? The sprocket doesn't have anything to lock it in place. The phaser have so much play in it?

Still haven’t found a good answer as to where to set the intake cam when putting the phaser on. Mine rolled forward when I took the chain off. My exhaust cam also moved counter clockwise a hair so the timing line was above the head deck. When reinstalling the chain, do I move the exhaust cam back to level? It looks like I’m your video, the exhaust cam line was where mine is currently (just above the head deck line). What to do?? There’s little to no info about this one out there. All data is no help. They say just take it off and put it back essentially.

This was a great clear video. What were you doing exactly with the 2 pry bars? Are you just loosing to be able to move or replace the chain?

What were u doing when u were prying on the timing tensioner ? Did you not remove that plastic piece in order too free the tension?

Hi, this is a great video. I know this may not be easy to remember, but do you recall what size the Allen Wrench was that you used to loosen and tighten the phaser when you removed/installed it?

I'm a visual learner and was able to follow most of what you were doing. I have some questions as I have to replace this same exact component. 1) What were you doing with the two pry bars on the timing chain before you removed and replaced the CVVT motor? 2) I'm assuming the timing marks may or may not be lined up exact and that is why you have to turn the motor so that timing marks are aligned before replacing the CVVT intake part? Thanks,

Mejor imposible

Link to part ?

Hello Bro I live in New York. I have same problem How much price for this job(labor)?

Que pasa si está dañado el engrane ese que tiene guías?

Que motor es igual al de Kia óptima 2007 2.4 standar

I have same problem with my sonata 2016 the part was change and just work good for a couple of days and back doing the same high rpm between 1000 to 2000 rpm . I don't know how to fixed this problem. Still a same again.

Hi, how long did it take you to do this job? And whats the torque spec for the phaser and crankshaft bolt. Please answer im doing this job next week and i can't find the torque spec

You don’t have to line the links up. Just get your marks lined up.

Buen día bernardo hablas español ? Bueno tengo un problema con mi carro Hyundai sonata 2015 2,4 sport me prendió la luz de p1326 le cambien el censor scripción del código DTC P1326 ...El KSDS (Sistema de detección del sensor de detonaciones) tiene como función detectar las vibraciones que son señales de desgaste excesivo del cojinete de la biela. Este sistema se encuentra diseñado para dar advertencia al conductor de una etapa temprana del desgaste de los rodamientos, antes que pueda producirse un daño severo al motor, en donde se incluye una falla del motor. Cuando comienzan a tener lugar constantes vibraciones causadas por el desgaste de los cojinetes, la luz MIL (luz indicadora de mal funcionamiento) tiene un parpadeo continuo para advertir al conductor de la situación. Además de esto, será establecido un código DTC que indicará la razón del problema. En el caso del código P1326 OBDII para los vehículos Hyundai significa que el KSDS ha experimentado un mal funcionamiento. … le cambié el censor por uno nuevo siguió con la falla del mismo código.. toma la decisión de desar tapa y cadena a ver y todo se ve en su tiempo pero voy a reemplazar el engrane de CVVT de admisión. Pero note qué hay que graduar el engranaje y no se cómo hacerlo.. tendrás información o video de eso es en engranaje número de parte 24350 2GGA0

I want the part number

I think This sonata is a six cylinders engine, is not it? I have had a look at a 2014 sonata’s 4 cylinders engine, it does not look like this one, I think there was only one plastic engine top cover covering both the camshafts pulleys and rods

What is the part number ? I need the same one for same car