500 TON HYDRAULIC PRESS VS VERY HARD OBJECTS

>reads “do not try at home” >sadly wheels 500 ton hydraulic press back into garage and closes door

Reporter: "Do you take steroids?" 80mm steel ball bearing: "I don't juice. Just exercise, good eating, and sleep. Sometimes take a cold shower."

6:03 Tungsten ball: CALL AN AMBULANCE!!! ...BUT NOT FOR ME!!!!

The hydraulic press: “I’m tired boss.”

I love the warning at the beginning. "Don't try this at home", Yeah, because everyone has a 500 ton press in their home!

I am a retired metal forger. One of the presses I had access to was 24,000 Tons. We also had a 12,500 and a 500. ton. One day I was exercising the 24 and decided to see what it would do to a wooden 4x4, it was about a foot long. It took down to just under a 1/4'' and then stoped. At this point I was dumbfounded I thought it would take down to paper thin. I was about to pull back on the control lever, and that is when the wood exploded. ( was now petrified) I was in a very large building by my self until the would explode. that is the exact time some of my superior’s come walking in the side door next to the large roll up door. A good size piece of the wood hit the roll-up door as they stepped in the building. There was a large bang at the roll-up door, next to them, they looked to see what the racket was, but the wood had ricocheted off in another direction. I pulled up on the lever, and removed the evidence promptly, they shrugged it off, know body was hurt, and this foolishness was never repeated again.

Dude, if you keep doing tests like this, you're going to create a black hole in the world.

I’ve been wasting my life on YouTube for years. That was one of the more incredible things I’ve ever seen..

Bro Lost His Studio Just To Break Balls 💀💀

Anyone else squinting their eyes?

That 500 ton press is amazing. Yet it doesn't stand a chance against a 3 day old McDonalds french fry.

Didn't know there were so many ways to destroy a hydraulic press! 🤣

Lol, this guy literally has balls of steel

I would like to see what this looks like using a thermal camera. These steel and tungsten objects must get really hot when subjected to so much pressure.

I only use my 500 ton press for cracking walnuts.

Tungsten carbide: "You don't wanna mess with me son."

4:08 To think, even after being dipped in liquid nitrogen, the 80 mm steel ball still survived.

30mm steel: “Oh noes I broke” 😭 80mm steel: I don’t think so.

Bro, you’re lucky it’s just the studio. If the 80mm steel ball slips, that’s basically an 80mm ballistic bullet goes straight to you.

That ball really said: “it’s Opposite Day >:)” to the studio and the camera💀