OBS FORD TILT STEERING COLUMN LOOSE. REPLACING BEARINGS STEP BY STEP.

16,918

791 0

Published 2023-09-01

I DIDNT THINK ABOUT RECORDING THIS UNTIL AFTER IT WAS ALL APART. I DIDN MY BEST TO WALK YOU THROUGH THE ENTIRE PROCESS OF REASSEMBLY. HOPEFULLY IT HELPS SOMEONE.

All Comments (21)

@batcavecomics4499 4 months ago

Glad I found your video, exactly what has happened to my truck. Now I know the fix. Thanks for sharing.
@dennisbailey4296 10 months ago

Thanks for taking your time showing us how to take those columns apart and back together. I've had them apart before but didn't take the whole assembly apart because of bearings were still good when I did my last one but thanks a lot they are a little tricky appreciate you showing us how it's done. All the best from Canada
@richardhoneywell7411 10 months ago

Great video J.C.Smith thanks for sharing how to fix a lose column on this Ford pickup. Looking forward to your next video stay safe J.C.Smith.
@slngblde 10 months ago

Thanks for posting this JC. I need to do this on my mustang before I get it back on the road. A former dealer tech friend said those weren’t serviceable, I figured otherwise but never looked into it.
@Chr.U.Cas1622 10 months ago

👍👌👏 again and as always. Thanks a lot for making teaching explaining recording editing uploading and sharing. Best regards luck and especially health to all of you.
@HODGEPODGEDODGEGARAGE 10 months ago

Nice work J.C 🔧🔩 That spring looks like a pain but you made it look easy. Have a great weekend
@eddiepatterson5025 10 months ago

Thank you showing the tilt collum repair. Truck starts quickly and runs well
@2H2521 5 months ago

God, what a mess! Great job & tutorial though, really admire you doing that for your son!
@gs1100ed 10 months ago

I broke the steering column on my 80 Chevy pickup by doing the same thing. Using the steering wheel to pull myself up into the truck. Steering columns are not designed to support a persons weight, but there is no handle to use. Just a bad design. I learned about steering columns the hard way. There are also special tools required to disassemble and assemble them. Not a fun job. Thank you for sharing!
@Bore_Punch 10 months ago

Thank you for showing us how to do this. I had a bronco that the wheel was wobbly. I ended up pulling a column from the junkyard.
@nikodiaz5012 7 months ago

thank you very much!!!!!! that spring that you zip tied, has been giving me problems all day!!!!
@scotthultin7769 10 months ago

Hi JC thank you for sharing 😊
@edwarddherde9536 10 months ago

Great explanation video thank you for sharing and taking the time to do this video
@javierperez1309 6 months ago

This helped so much. Thank you
@patdf4183 4 months ago

Awesome. Thank you.
@ydocproductions5593 10 months ago

Hopefully I never have to do that job on my Powerstroke, but it’s good to know it’s not that difficult if you have the right tools and know how. I don’t think you could get a better starting Powerstroke though J.C. Sounds like it starts up with just one revolution. Pretty cool truck👍
@ericcorse 10 months ago

That ought to help some folks out, I like the cable ties tip.
@scubasteve7946 10 months ago

Lol- "don't be intimidated, it's not that big of deal." After practically reassembling a mechanical watch on camera with one hand filming 😂😂
@larrybe2900 10 months ago

I can understand the trand toward pushbutton start in most cars today. I have it now and with the dial transmission (car) it is not normal. I still reach for the gear lever.
@randydobson1863 10 months ago

hello j.c & mrs smith it's is randy & i like yours video is cool thanks j.c. thanks friends randy