CRAZY FAST - How to GT86/BRZ Diff Swap!

It’s so funny hearing guys from the other side of the world say they’re gonna “take a trip to Mexico”

Thanks for the research & info, alotta good info there for all of us 👍🏽

Nice vids i thought you had 100k+ subscribers 😅 you deserve more 😅😅😅

Another great video!

thanks for sharing, great video!

OK so if you have an is200 bin the shafts, stub axles and the economy spec diff. If you have stock IS300 then just swap the diff. if you went the 4.3 you'd be launching all over the place :) stock is300 diff is 3.7 its junk with the auto Great video with lots of info there, love the tunnel rowdy with all the anti lagz

Sounds so rowdy 🥵

That sounds like a 38mm external waistgate? Good on ya Brothers🤙🏾😎

auto is200 diffs are 4.1 ratio in Ireland, manual is 3.9 ratio is stamped on the crown wheel

Holy shit that is a clean subframe. Must be nice to live in a place with no rust, haha

So if I got it right, non-turbo JZX100 stubs are the same as IS300 stubs ? I found the gt86 diff, I have the 300 axles, I just need to find the stubs now and even when cross checking the parts compatibility through toyodiy I have troubles finding actual compatible parts (they list the 7.5 inch SXE10 stubs as the same as the 8" stub from the JCE10/IS300), and there are a loooot of cars listed when you look through that cross reference (aristo, crown, soarer, supra, chaser, etc). I wish I could buy all of them and reference all the sizes so there would no longer be misleading ahah, for example the toyota parts catalogue says stubs from 1997 and later model JZA80 fits, but earlier models JZA80 don't (1997+ has the 10mm bolts but earlier ones have 12mm bolts). It's all so complicated lmao

Have you been drifting yet? How does it feel?

So I have an auto Altezza. If I want to upgrade to a BRZ LSD, I'll need IS300 stub axles and axle shafts? What about the propeller shaft?

Are the axles the same length on all of the cars? jzx/crown/is. So that the fit on every car, as long as u have the right stubs?

Could the y38 86 diff fit into a mx83 Cressida at all. The diff has the jzx stubs and axle’s so would suit the power of the 1jz I’ve put in it.

From what you found is it impossible to fit one in an aristo? Or is there an axle shaft combo that would work.

Do you know if a manual altezza diff would directly bolt into an auto altezza. Car sounds sick btw.

Im still yet to find the limits of the is300 lsd but this is handy to know for thr future

so the stub axles from a 4.1 open diff in an auto is200 won't fit directly to the gt86 4.1 LSD? please help i'm about to do this swap 🙄

Scion doesn’t exist anymore, so it is the GT86 for us.