PCV Valve Cleaning - Volkswagen Polo

Published 2024-03-31
Removing, cleaning and replacing the PCV valve (Positive Crankcase Ventilation valve) in a 2002 to 2009 Volkswagen Polo Mk4 4-cylinder 1.4 litre petrol.

The PCV or Positive Crankcase Ventilation valve is a one-way valve attached to the crankcase of the engine. When an internal combustion engine is running, the majority of the waste gases are vented out through the exhaust system. However, some waste gases can be forced past the pistons and into the crankcase. The PCV valve allows these gases to be vented from the crankcase and back through the intake system to be re-burned. Over time, the PCV valve can get clogged up with sludge and soot and stop working properly, which can allow the gases to accumulate in the crankcase. These gases cause a build-up of pressure in the crankcase which could cause a number of problems, such as blown gaskets or damaged seals, leading to oil leaks. The PCV system reduces harmful vehicle emissions so it is an essential part of the system. PCV valves are a relatively cheap part to replace but it might be worth cleaning them first before renewing them.

Thanks for watching. Please comment, like and subscribe !.


All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.

©   / screwsnutsandbolts   2024

Read important information below:

Disclaimer:

My videos are a guide to making repairs and also to provide helpful information.
Do not attempt to make any repairs unless you’re sure you know what you’re doing. For more detailed information, if something is not clear to you, or you don't understand something, have the repair carried out by a qualified mechanic or at your local car dealer. Any repair you carry out on your car you do at your own risk.

Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts.

All Comments (6)
  • I was just thinking of buying a new one, good thing I saw your video
  • Мога да ти дам съвет за следващо видео. Покажи как се чисти шумата под кората на чистачките
  • My 2004 vw polo 1.4 petrol has done 190,000 miles on the original pcv valve just replaced it plus cam sensor just in case as had a few issue recenlty one being egr valve failing whch I believe was the original thats also been replaced.
  • Excuse me, your saying in the description that the PCV valve should only allow airflow from the crankcase to the intake manifold, but when you clean it you spray through it the other way around, no?
  • @raym4916
    What is the purpose of cleaning this part?