How to enlarge a hole in a Corian kitchen worktop | install pop up socket
9,899
Published 2023-07-02
All Comments (19)
-
Probably also worth mentioning that the use of a side handle on the drill is ESSENTIAL when using large hole saws like this. I nearly broke my wrist a few years ago. Took weeks to heal. Take it from me, these drills have a lot of torque so make sure you use the screw in side handle too Great video as usual. Have a great Sunday ๐
-
I've just used a jigsaw with a sharp wood blade. Used painters tape to cover the corian to avoid damage.
-
I recently did a similar job to install new speakers on my fiberglass/gelcoat sailboat. I used a Bosch bimetal 140mm hole saw with similar teeth to yours on a Fein 12v 4-speed power drill and a 90deg elbow. I used a jig in exactly the same way than you. I ran the hole saw in reverse in 1st gear so that the teeth dont dig under the fiberglass and it worked very well without the power drill cutting off. The key to success was to run the hole saw in reverse
-
Brilliant idea with the jig. I bet many trying to do the same would try using a jigsaw. Nice one๐๐
-
I still have a few corded 240 volt large chuck drills I use for bigger jobs. Brought long before battery drills were available.
-
Hole Enlargement Extravaganza! Now that's a show I never thought I'd be binge-watching! ๐ Who knew that making a hole for a new socket could be such an epic journey? I mean, the struggles with the hole saw, the intense battle with double-sided tape, and the heroic vacuuming of dust! It's like a DIY action movie but with kitchen worktops. Kudos to you for braving the perils of hole enlargement and providing us with this highly entertaining tutorial. Can't wait for the sequel: "The Sizzling Saga of Silicone Application"! Keep up the work, and remember to wear those safety glasses next time!
-
Couldn't see if you did or not when making the jig, but a handy tip with hole saws is to drill some holes with say a 10mm drill bit just on the perimeter once you've started the cut. This gives the dust a way out and makes the cut much easier. Obviously not needed when doing the final cut as you already had the big hole there.
-
Interesting, thank you
-
Interesting video,great idea with the jig,thanks
-
Great video !!!! Thanks
-
Great idea with the jig thanks for sharing๐.
-
You really need a mains powered drill for that job.
-
Bravo et merci
-
๐๐๐Thank you
-
Enjoy your evening with all your family around, Ultimate Handyman Thanks for sharing it with us CANNY Ultimate Handyman From Nick Ayivor from London England UK ๐ฌ๐ง โฐ๏ธ 1712
-
๐๐
-
Nooice!
-
Great, but you forgot the lube.