Fixing Xbox One Power Brick with Orange Light

Published 2021-02-05
Replacement capacitors: (Affiliate links)
amzn.to/3w9ahyt
s.click.aliexpress.com/e/_AOLpOv

tl;dr; Replaced some capacitors
Danger of electric shock. I won't be responsible for any harm or death caused by following my actions
I got this power brick from a friend of a friend, paid me to repair it.

The tools I use (May be affiliate Links)
s.click.aliexpress.com/e/_98q9Vh - Hot Air Station 857DW+
s.click.aliexpress.com/e/_9RPEZd - Hot Air Station Nozzles
s.click.aliexpress.com/e/_A7KwvN - Soldering Station AIXUN T3A T245
s.click.aliexpress.com/e/_ALcULh - TS100 Soldering Iron, recommending Set 3, pair this with a grounded 24V 3.5A power supply which uses a 5525 connector, inner positive (Or splice your own on it)
aliexpress.com/item/32880372287.html - Microscope kit
s.click.aliexpress.com/e/_9Qvp71 - Preheater
s.click.aliexpress.com/e/_AWlly3 - LCR Tweezers
www.amazon.com/dp/B07SS77N7K - Bench Power Supply
www.amazon.com/dp/B01GF0KV6G - iFixit Toolkit
s.click.aliexpress.com/e/_APgd5z - USB C Amp Meter (These can break, check them often for reliability)
s.click.aliexpress.com/e/_Aswfnv - Soldering mat
s.click.aliexpress.com/e/_9z2dRh - Silicone mat
www.amazon.com/dp/B0048F601Q - High quality flush cutters (be gentle with these)
s.click.aliexpress.com/e/_AofT6p - Board Holder
s.click.aliexpress.com/e/_9hbT9B - Reballing jig
s.click.aliexpress.com/e/_A22LT7 - Universal reballing stencils
s.click.aliexpress.com/e/_AePbUd - Nintendo Switch stencils
s.click.aliexpress.com/e/_AMrzgZ - SMD Parts organizer, 144 slots for small parts
s.click.aliexpress.com/e/_AXLRVL - SMD Parts organizer, 48 slots for larger parts

Consumables (May be affiliate links)
s.click.aliexpress.com/e/_AYuXg7 - Solder mask
s.click.aliexpress.com/e/_9ydNVd - Ceramic tweezers
s.click.aliexpress.com/e/_ATzFFD - Tweezers
www.amazon.com/dp/B01NBM0MB5 - BNTECHGO Enameled wire, 38AWG and 32AWG
aliexpress.com/item/1005002650000843.html - Standard JBC tips I use
s.click.aliexpress.com/e/_ATCcgB - Large JBC Tip
store.rossmanngroup.com/ab20-gootwick-1-5.html - Desoldering Braid
www.amazon.com/dp/B004X4L076 - 63/37 Leaded Solder
store.rossmanngroup.com/amtech-nc-559-v2-30-cc-161… - Flux
www.amazon.com/dp/B076CB54ZR - Thin solder wire
s.click.aliexpress.com/e/_ArP2wx - Kapton tape
s.click.aliexpress.com/e/_ArqzHN - Swappable multimeter probes
s.click.aliexpress.com/e/_99G3tr - Solder balls for BGA
s.click.aliexpress.com/e/_AbnYU1 - Solder paste

To support me:
If you make purchases off of aliexpress you can use one of my links. You can also click the link and then buy something else that you need, it still counts!
Aliexpress Wishlist: rb.gy/stsawx
Amazon Wishlist: rb.gy/dei1w5
Tip me: streamelements.com/italianretroguy/tip
Patreon: www.patreon.com/italianretroguy

Social Media:
twitter.com/italianretroguy
www.instagram.com/italianretroguy/
discord.gg/cVWTrAKSWQ

#soldering #electronicsrepair #repair

All Comments (21)
  • @neoanderz
    There is a REAL danger of doing this yourself if you don't know what you are doing.
  • @maurisanto7973
    Yes thanks i just saved money and fyi if you have a old xbox 360 power brick lating around like i did they use the same capacitors lol im cheap so glad i checked i didn't wanna wait and spend money but it worked thanks man
  • @aceifyyed2052
    my orange light turns on for literally a millisecond (im not even overexxaggerating), what could this mean and how could i fix it
  • I teardown my xbox and turned on without fan the cpu went too hot in seconds like in 2sec, is it problem with xbox or brick?? Brick seems fine
  • @MasonicSeven7
    Mine just stays orange and when I press the button it slightly goes to green then back to orange, another thing is that the white light doesnt even turn one.
  • @TafaraMolife
    I just replaced my capacitors but it still is just orange. What could be the problem? Its white before i connect to the console, but if i conect to the console, it remains white. If i connect to the console before switching on power, it remains orange.
  • The tool you used in taking out those black screws, what's it called please ?
  • @LeeWhon-eo2um
    Hi mine just doing the same rn and i wonder if u cant replace this power suplly to a new one???
  • @OmniscientNull
    Mines straight orange and never changes and the Xbox makes the starting sound but very faint
  • @ash90989
    HELP mine is blinking orange and it’s making a tick noise when it blinks…I am literally so annoyed rn I’ve tried everything what could this mean..?
  • So my brick's light works just fine as it turns white when plugged in, and my xbox works almost fine too. But after some time the xbox turns off on its own. Recently I stopped playing for a week and now the xbox just keeps turning off as soon as I turn it on... Do you thinks its the same problem?
  • @andrewkds
    I opened mine and it seems that the 1500uf 16volt capacitor has swollen. Im replacing it today and i will let you know if thats the cause. Its weird that the complete opposite capacitor has swollen compared to yours heh.
  • Hi, How I can activate 12V without connection to the console? I wont use this power brick to the other needs. Thank You.
  • Thanks for the video, my brick just dies then I pull the power, plug it back in n it works again, don't no if I have the same issue
  • @YungCumstain_
    Mine would do that two the Xbox would turn on for a couple seconds then I would hear the disc rejecting and the Xbox power off and then like a little spark in the Xbox and it would go off
  • @GunnarsGlobe
    i need help my xbox one power brick, it shows red lighy and when i try turning my xbox on , you can hear the sound but it just wouldn’t turn white. I opened the xbox power supply and i see something is making noise but its not the fan, the fan is not moving at all.
  • @cldhxzyt5637
    Hi, my Xbox 360 has orange led on the power brick and there is a 3 rings of death can u help me out?
  • I have a off brand power brick and before something happened it would always get really hot and make this horrible noise. It’s been months so I plug it in and it has a orange light and when I touch the on button it makes the beep but no light on the power button. And when I press it very lightly flashes. If I click the button then immediately do it again I hear the shut off noise. So I took the power brick apart and like every connection is covered with a white/cream colored hard foam or rubber. So could it just be the power brick even if the Xbox light doesn’t show up? And what would be a good power brick to get? Sorry this is so long I just don’t want to waste money on a brick if it’s the Xbox itself. Tnx